Honeywell Humidifier 2000 Series Manual

The Honeywell Humidifier 2000 Series is a high-performance humidification system designed for medium to large rooms, featuring adjustable humidity control, a large-capacity water tank, wick filter technology for efficient moisture output, quiet operation, an easy-to-read digital display, automatic shut-off, and a refill indicator. It helps maintain optimal indoor humidity levels for comfort and health. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to Power 7. Operating the Humidifier 8. Maintenance & Cleaning 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Digital Control Panel, Water Tank, Wick Filter, Mist Outlet, Humidistat, Power Cord, and Carry Handle.

Feature	Description
Digital Control Panel	For setting desired humidity level and viewing current status
Adjustable Humidistat	Allows precise control of room humidity from 30% to 60%
Large Water Tank	High-capacity tank for extended operation without frequent refills
Wick Filter System	Evaporative wick absorbs water for efficient, clean moisture output
Quiet Operation	Designed for minimal noise during use
Automatic Shut-Off	Turns off when desired humidity is reached or tank is empty
Refill Indicator	Light alerts when water tank needs refilling
Carry Handle	For easy transport of the unit
Easy-Clean Design	Removable tank and accessible parts for simple maintenance

Installation

Unpack and inspect all contents. Place on a flat, stable, and level surface away from direct sunlight and heat sources.

Remove the water tank and fill with clean, cool water. Do not use hot water.
Install the wick filter: Remove from packaging and insert into the base unit, ensuring it is seated properly.
Place the filled water tank back onto the base, aligning it correctly.
Position the humidifier at least 12 inches from walls and furniture for proper air circulation.

WARNING! Always place on a water-resistant surface. Do not operate without the wick filter installed. Ensure the unit is on a stable surface to prevent tipping.

First-Time Setup

After installation, plug the unit into a standard 120V AC electrical outlet.

Power on: Press the POWER button on the control panel.
Set desired humidity: Use the UP/DOWN buttons to select your preferred humidity level (30%-60% recommended).
Select fan speed: Choose between LOW, MEDIUM, or HIGH settings using the FAN button.
Monitor operation: The digital display will show current room humidity and set level.

CAUTION! Use only with a grounded outlet. Do not immerse the unit in water. Always handle the water tank with care to avoid spills.

Specifications

Model Series: Honeywell 2000 Series.
Coverage Area: Up to 500 square feet.
Water Tank Capacity: 1.5 gallons (5.7 liters).
Output: Up to 1.2 gallons per day (depending on settings).
Humidity Control: Adjustable digital humidistat (30% - 60%).
Fan Speeds: Three settings (Low, Medium, High).
Power Source: 120V AC, 60Hz.
Power Consumption: 35W (max).
Dimensions (HxWxD): Approx. 18 x 11 x 10 inches.
Weight (empty): 7.5 lbs.

Controls and Settings

Access all functions via the front Digital Control Panel.

Control Panel Buttons: POWER, HUMIDITY (UP/DOWN), FAN SPEED, TIMER, LIGHT.

Humidity Setting: Adjust desired level in 1% increments. Fan Speed: LOW for quiet nighttime operation, MEDIUM for balanced output, HIGH for maximum humidification. Timer: Set 1-12 hours for automatic shut-off. Display Light: Adjust brightness or turn off for dark rooms.

Connecting to Power

Use only the provided power cord and a properly grounded 120V outlet.

Ensure the unit is off and the water tank is properly seated.
Plug the power cord directly into a wall outlet. Do not use an extension cord.
Press the POWER button to turn on the humidifier.

Tip: For safety, plug the unit into an outlet that is not controlled by a wall switch. Ensure the cord is not pinched or damaged.

Operating the Humidifier

Designed for continuous or intermittent use to maintain comfortable humidity.

Daily Operation: The unit will run until the desired humidity level is reached, then cycle on/off automatically.
Refilling: When the REFILL indicator light turns on, remove the tank, refill with cool water, and replace.
Changing Settings: Adjust humidity or fan speed at any time using the control panel.
Using the Timer: Press TIMER to set automatic shut-off after 1-12 hours.
Night Mode: Set fan to LOW and dim the display light for undisturbed sleep.

WARNING! Never add water while the unit is plugged in. Always turn off and unplug before refilling or cleaning. Use only clean, cool tap or distilled water to minimize mineral deposits.

Maintenance & Cleaning

Regular maintenance ensures optimal performance and longevity.

Daily: Check water level and refill as needed.
Weekly: Clean the water tank with a mild detergent and rinse thoroughly. Wipe the exterior with a damp cloth.
Monthly or as needed: Replace the wick filter (typically every 1-3 months depending on water hardness and usage).
Seasonal Storage: When not in use for extended periods, empty all water, clean all parts thoroughly, and store in a dry place with the tank separated from the base.

CAUTION! Unplug the unit before any cleaning or maintenance. Do not use abrasive cleaners, bleach, or solvents. Never immerse the base unit in water.

Regulatory Information

This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. Copyright © Honeywell International Inc. For support, visit www.honeywellhome.com or contact customer service at 1-800-333-7467.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit does not turn on	No power / Tank not seated	Ensure unit is plugged in; check outlet; ensure water tank is properly installed on base.
Little or no mist output	Clogged wick / Low fan speed	Replace the wick filter; increase fan speed to HIGH; ensure tank has water.
Water leaking	Tank not seated / Cracked tank	Remove and reseat the water tank; check tank for cracks or damage.
Unusual noise	Fan obstruction / Mineral buildup	Ensure nothing is blocking the air inlet/outlet; clean the fan area; descale if necessary.
Display not working	Power issue	Unplug and replug the unit; ensure power cord is fully inserted.
Humidity not increasing	Room too large / Wick issue	Ensure unit is sized for the room; replace wick filter; check that doors/windows are closed.

Reset: Unplug the unit for 60 seconds, then plug back in to reset the electronic controls.

Service: For issues not resolved above, contact Honeywell Customer Support: 1-800-333-7467; www.honeywellhome.com