Honeywell Humidifier HCM-800 Series Manual

The Honeywell HCM-800 Series is a high-capacity cool mist humidifier designed for large rooms up to 800 sq. ft. It features a 1.5-gallon tank, adjustable humidity control, quiet operation, automatic shut-off, easy-to-clean design, and a wicking filter for demineralization. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to Power 7. Operating the Humidifier 8. Maintenance & Cleaning 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Water tank, base unit with motor, wicking filter, control panel, humidity dial, and power cord.

Feature	Description
Large Capacity Tank	1.5-gallon tank for extended operation
Adjustable Humidity Control	Dial to set desired humidity level
Quiet Operation	Designed for minimal noise during use
Automatic Shut-Off	Turns off when tank is empty
Easy-to-Clean Design	Removable tank and base for simple cleaning
Wicking Filter	Demineralization filter for white dust reduction
Control Panel	Power button and humidity dial
Power Cord	Standard 120V AC power connection
Carry Handle	Integrated handle for easy transport
Filter Replacement Indicator	Light alerts when filter needs changing

Installation

Unpack and inspect contents. Place on stable, level surface.

Remove all packaging materials from humidifier and tank.
Place humidifier on a flat, stable surface away from walls and furniture.
Install wicking filter: Remove filter from packaging and insert into filter slot in base.
Fill tank with clean, cool water: Carry tank to sink, remove cap, fill, and replace cap securely.
Place tank on base: Align tank with base and set in place.

WARNING! Do not use with damaged cord or plug. Ensure unit is on a dry surface.

First-Time Setup

Prepare humidifier for initial use.

Install filter as described in Installation.
Fill tank with clean water and place on base.
Plug power cord into 120V AC outlet.
Turn power switch to ON position.
Set humidity control dial to desired level (recommended 40-60% for comfort).
Allow unit to run for a few minutes to prime the filter and begin humidifying.

CAUTION! Use only clean, cool water. Do not add essential oils or chemicals.

Specifications

Model Series: HCM-800 Series
Coverage Area: Up to 800 square feet
Tank Capacity: 1.5 gallons (5.7 liters)
Run Time: Up to 24 hours on low setting
Humidity Output: Up to 1.5 gallons per day
Noise Level: Quiet operation (under 35 dB on low)
Power Source: 120V AC, 60Hz
Power Consumption: 30W maximum
Dimensions: 15.5" H x 12.5" W x 10.5" D
Weight: 8.5 lbs (empty)

Controls and Settings

Control Panel: Power switch, Humidity Control Dial, Filter Indicator Light.

Power Switch: Turns humidifier ON/OFF. Humidity Control Dial: Adjusts mist output and humidity level (Low to High). Filter Indicator Light: Illuminates when filter needs replacement (after approximately 30 days of use).

Operation Modes: Continuous run on selected setting. Automatic operation maintains set humidity level. Unit will automatically shut off when tank is empty.

Connecting to Power

Use only with proper electrical connection.

Ensure humidifier is turned OFF before plugging in.
Plug power cord directly into 120V AC wall outlet.
Do not use extension cords or power strips.
Ensure cord is not pinched or damaged.

Tip: Place humidifier within 4 feet of outlet to avoid cord hazards.

Operating the Humidifier

For optimal performance and comfort.

Fill tank with clean, cool water daily.
Turn power switch to ON position.
Adjust humidity control dial to desired setting.
Monitor room humidity with hygrometer (not included).
When tank is empty, unit will automatically shut off.
To refill: Turn unit OFF, remove tank, refill, replace tank, and turn ON.
For continuous operation: Refill tank before completely empty.

WARNING! Never operate without water in tank. Do not move unit while in operation.

Maintenance & Cleaning

Regular maintenance ensures optimal performance and longevity.

Daily: Refill with clean water.
Weekly: Clean tank and base with mild detergent and soft cloth. Rinse thoroughly.
Monthly: Replace wicking filter (sooner if water is hard or indicator light is on).
Seasonal: Deep clean before storage. Use vinegar solution to descale if needed.
Storage: Empty all water, dry completely, and store in original box in dry location.

CAUTION! Unplug before cleaning. Never immerse base in water.

Regulatory Information

UL Listed: Meets safety standards for household use. FCC Part 15: Class B digital device; complies with interference limits. Copyright © Honeywell International Inc. For support, visit www.honeywellhumidifiers.com or contact 1-800-332-1110.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No mist output	Empty tank or clogged filter	Fill tank with water; replace filter if clogged.
Unit not turning on	Power issue or empty tank	Check power connection; ensure tank has water.
White dust in room	Hard water minerals	Use demineralization cartridge or distilled water.
Water leakage	Improper tank placement or damaged seal	Ensure tank is properly seated; check seals for damage.
Unusual noise	Motor issue or mineral buildup	Clean unit thoroughly; contact service if noise persists.
Filter indicator light on	Filter needs replacement	Replace wicking filter with new one.

Reset: Unplug for 30 seconds, then restart.

Service: 1-800-332-1110; www.honeywellhumidifiers.com