Honeywell Humidifier HE360A1027 Manual

The Honeywell Humidifier HE360A1027 is a high-capacity evaporative humidifier designed for whole-house moisture control. It features automatic digital humidistat control, a large-capacity water tank, wick filter system, dual fan speeds, easy-fill design, low water indicator, auto shut-off, and quiet operation. Compatible with standard 120V AC outlets. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to Water Source 7. Operation Modes 8. Maintenance & Filter Care 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Digital Control Panel, Water Tank, Wick Filter Assembly, Fan Motor, Humidistat Sensor, Power Cord, Air Outlet Grille.

Feature	Description
Digital Control Panel	LCD display with humidity readout and settings
Automatic Humidistat	Maintains desired humidity level automatically
Large Water Tank	High-capacity removable tank for extended operation
Wick Filter System	Evaporative wick for efficient moisture output
Dual Fan Speeds	High and Low settings for adjustable airflow
Easy-Fill Design	Wide opening for convenient refilling
Low Water Indicator	LED alert when water level is low
Auto Shut-Off	Turns off when tank is empty or removed
Quiet Operation	Designed for minimal noise during use
Power Indicator	LED shows when unit is powered on

Installation

Unpack and inspect all components. Place on level, stable surface away from direct heat sources.

Assemble base unit: Attach tank base if required.
Install wick filter: Remove packaging, insert into filter slot.
Fill water tank: Remove tank, fill with clean cool water, replace securely.
Position humidifier: Place at least 6 inches from walls for proper airflow.
Plug into AC power outlet.

WARNING! Do not place on carpets or wet surfaces. Ensure unit is upright before operation.

First-Time Setup

Power on humidifier; initialize system.

Set desired humidity: Press HUMIDITY +/- buttons to select target (30-60% recommended).
Select fan speed: Press FAN button for High or Low setting.
Enable auto mode: Press AUTO to let humidistat maintain set level.
Calibrate if needed: Hold SET for 5 seconds to reset humidity sensor.

CAUTION! Use only clean, cool water. Do not use hot water or additives.

Specifications

Model: HE360A1027
Coverage Area: Up to 3600 sq ft
Tank Capacity: 5.5 gallons
Output: Up to 18 gallons per day
Humidity Control: Digital humidistat (20-80% RH range)
Fan Speeds: 2 (High/Low)
Power Consumption: 120V AC, 60Hz, 150W max
Noise Level: < 50 dB on Low setting
Dimensions: 20.5" H x 16" W x 13" D
Weight: 22 lbs (empty)

Controls and Settings

Control Panel: POWER, HUMIDITY +/-, FAN, AUTO, FILTER RESET.

Display Icons: Power, Humidity Setpoint, Current Humidity, Fan Speed, Low Water, Filter Change.

Humidity Setting: Adjust between 20-80% RH. Fan Speed: High for maximum output, Low for quiet operation. Auto Mode: Maintains set humidity automatically. Filter Reset: Hold for 3 seconds after filter replacement. Sleep Mode: Dims display lights after 10 minutes of inactivity.

Connecting to Water Source

For manual fill: Use removable tank. For continuous operation: Optional direct water line kit available.

Turn off and unplug humidifier before connecting.
Attach water line kit (sold separately) following included instructions.
Connect to 1/4" water supply line with shut-off valve.
Check for leaks before powering on.

Tip: For best results, use distilled or demineralized water to reduce mineral buildup.

Operation Modes

Three operating modes: Manual, Auto, and Boost.

Manual Mode: Set desired humidity and fan speed manually.
Auto Mode: Unit adjusts fan speed automatically to maintain set humidity.
Boost Mode: Hold FAN button for 3 seconds for maximum output (runs on High for 2 hours then returns to previous setting).
Night Mode: Display dims automatically; fan runs on Low if in Auto mode.
Programmable Timer: Set on/off times via optional remote control accessory.

WARNING! Do not operate without water or with damaged wick filter.

Maintenance & Filter Care

Wick Filter: Replace every 1-3 months depending on water hardness and usage. Cleaning: Weekly tank cleaning recommended.

Turn off and unplug unit.
Remove and empty water tank.
Clean tank with mild detergent, rinse thoroughly.
Wipe base unit with damp cloth; dry completely.
Replace wick filter when mineralized or every season.
Reset filter indicator after replacement.

Care & Cleaning

Unplug before cleaning. Use soft cloth and mild detergent. Never immerse unit in water.

CAUTION! Do not use abrasive cleaners, bleach, or solvents. Ensure all parts are completely dry before reassembly.

Regulatory Information

UL Listed: Meets UL standard 867. FCC Part 15: Class B digital device compliant. EPA Energy Star: Meets efficiency guidelines. Copyright © Honeywell International Inc. All rights reserved. For support, visit www.honeywellhome.com or contact 1-800-328-5111.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit not powering on	Power source/connection	Check outlet; ensure plug is secure; test outlet with another device.
Low moisture output	Clogged filter/water level	Replace wick filter; ensure tank is full; clean water distribution tray.
Water leakage	Improper assembly/tank seal	Ensure tank is properly seated; check for cracks; replace tank if damaged.
Unusual noise	Fan obstruction/mineral buildup	Check for debris in fan area; clean wick and tray; ensure unit is level.
Display not working	Power issue/control board	Reset unit (unplug for 1 minute); check for loose connections.
Humidity not reaching set level	Room size/airflow	Ensure proper room size match; check doors/windows closed; increase fan speed.

Reset: Unplug for 5 minutes to reset control board.

Service: 1-800-328-5111; www.honeywellhome.com