Honeywell Humidifier HEV680 SERIES Manual

The Honeywell Humidifier HEV680 SERIES is a high-efficiency evaporative humidifier designed for large rooms up to 2,500 sq ft. It features a 3.5-gallon water tank, adjustable humidity control, wick filter system, digital humidistat, auto shut-off, quiet operation, easy-fill top, and indicator lights for filter replacement and tank empty. Powered by 120V AC, 60Hz. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Main unit with digital control panel, 3.5-gallon removable water tank, wick filter, power adapter, and user manual.

Installation & Placement

Unpack and inspect contents. Choose a stable, level location.

1. Remove all packaging materials from humidifier and tank.
2. Place unit on a flat, waterproof surface at least 6 inches from walls.
3. Install wick filter: Remove filter from bag, insert into filter slot until it clicks.
4. Fill water tank: Remove tank, open fill cap, fill with cool tap water, replace cap.
5. Place tank back on unit, ensuring it is seated properly.
6. Plug power cord into 120V AC outlet.

WARNING! Do not place on carpets or uneven surfaces. Keep away from heat sources and direct sunlight.

First-Time Setup

Power on humidifier; follow initial setup steps.

1. Press POWER button to turn unit on.
2. Set desired humidity: Use UP/DOWN buttons to select 30%-60% RH.
3. Select fan speed: Press FAN button to cycle through Low, Medium, High.
4. Allow unit to run for 10-15 minutes to prime the wick filter.
5. Check for proper mist output and adjust settings as needed.

CAUTION! Use only clean, cool tap water. Do not use hot water or additives.

Specifications

• Model Series: HEV680
• Coverage Area: Up to 2,500 sq ft
• Water Tank Capacity: 3.5 gallons (13.2 liters)
• Output: Up to 2.5 gallons per day (9.5 liters/day)
• Humidity Control: Digital humidistat (30%-60% RH)
• Fan Speeds: 3 settings (Low, Medium, High)
• Filter Type: Evaporative wick (HEV680W)
• Power Source: 120V AC, 60Hz, 40W
• Dimensions: 15.5" H x 13.2" W x 10.8" D
• Weight: 10.5 lbs (empty)

Controls and Settings

Control Panel: POWER, HUMIDITY UP/DOWN, FAN, FILTER RESET, TANK EMPTY indicator.

Functions: POWER turns unit on/off. HUMIDITY buttons set desired humidity level (30%-60%). FAN cycles through speeds. FILTER RESET resets filter replacement indicator after new filter is installed.

Indicator Lights: Green (power on), Yellow (filter needs replacement), Red (tank empty). Auto Mode: Unit automatically adjusts fan speed to maintain set humidity. Sleep Mode: Press and hold FAN for 3 seconds to enable quiet nighttime operation.

Operation & Daily Use

For optimal performance, follow daily operating procedures.

1. Check water level daily; refill when tank is low.
2. Adjust humidity setting based on room conditions (40%-50% recommended).
3. Use higher fan speed for faster humidification, lower for quiet operation.
4. Utilize Auto Mode for hands-free humidity control.
5. Turn off unit when not in use or when leaving for extended periods.

Tip: Place humidifier in center of room for even humidity distribution.

Maintenance & Cleaning

Regular cleaning prevents mold and mineral buildup.

1. Unplug unit before cleaning.
2. Empty and rinse water tank every 2-3 days.
3. Clean base unit weekly: Remove tank, wipe interior with soft cloth and mild detergent.
4. Descale monthly: Use white vinegar solution (1 part vinegar to 3 parts water) to remove mineral deposits.
5. Rinse all parts thoroughly with clean water and dry completely before reassembly.

WARNING! Do not immerse base unit in water. Never use harsh chemicals or abrasives.

Filter Replacement

Replace wick filter every 1-2 months for optimal performance.

1. Unplug unit and remove water tank.
2. Remove old filter from slot; discard properly.
3. Insert new HEV680W filter into slot until it clicks into place.
4. Press and hold FILTER RESET button for 3 seconds to reset indicator light.
5. Reinstall water tank and plug in unit.

Note: Filter life varies with water hardness and usage. Yellow indicator light signals replacement time.

Care & Storage

Proper storage extends humidifier life.

1. For seasonal storage: Unplug, empty all water, clean thoroughly.
2. Remove and discard old filter.
3. Dry all parts completely before storage.
4. Store in original box or cover in dry location.
5. Install new filter when preparing for next use.

CAUTION! Never store with water in tank. Keep away from extreme temperatures.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. UL Listed: Meets safety standards. Copyright © Honeywell International Inc. For support, visit www.honeywellhumidifiers.com or contact 1-800-332-1110.

Troubleshooting

Reset: Unplug for 60 seconds, then restart.

Service: 1-800-332-1110; www.honeywellhumidifiers.com