Honeywell Humidifier enviracaire Elite HE265B Manual

The Honeywell Humidifier Enviracaire Elite HE265B is a high-performance evaporative humidifier designed for large rooms up to 3600 sq. ft. It features a 4.5-gallon tank capacity, digital humidistat control, three fan speeds, a refill indicator, antimicrobial-treated wicking filter, easy-fill top, and quiet operation. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. Specifications 4. Controls and Operation 5. Filling the Water Tank 6. Maintenance & Cleaning 7. Filter Replacement 8. Safety Features 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Digital Control Panel, 4.5-Gallon Water Tank, Antimicrobial Wicking Filter, Humidistat, Three Fan Speeds, Refill Indicator, Easy-Fill Top, Carrying Handle.

Feature	Description
Digital Control Panel	Easy-to-read display with touch controls
4.5-Gallon Water Tank	Large capacity for extended operation
Antimicrobial Wicking Filter	Treats water to inhibit mold and bacteria growth
Digital Humidistat	Automatically maintains desired humidity level
Three Fan Speeds	High, Medium, Low for customized moisture output
Refill Indicator	LED light alerts when tank needs refilling
Easy-Fill Top	Convenient top-fill design, no need to lift tank
Carrying Handle	Integrated handle for easy portability
Quiet Operation	Designed for minimal noise during use
Automatic Shut-Off	Turns off when desired humidity is reached or tank is empty

Installation & Setup

Unpack and inspect contents. Place on a level, stable surface away from walls and furniture.

Remove all packaging materials from humidifier and filter.
Install the wicking filter: Remove filter from packaging and insert into filter frame.
Fill the water tank: Remove tank, fill with clean, cool tap water, and replace securely.
Position the humidifier: Place on a waterproof mat or towel in the center of the room.
Plug into a 120V AC outlet.

WARNING! Use only on a level, waterproof surface. Do not place near heat sources or in direct sunlight.

Specifications

Model: HE265B Enviracaire Elite
Coverage Area: Up to 3600 sq. ft.
Tank Capacity: 4.5 gallons (17 liters)
Output: Up to 4.5 gallons per day
Humidistat: Digital, adjustable from 35% to 65% RH
Fan Speeds: 3 (High, Medium, Low)
Filter Type: Antimicrobial wicking filter (replacement part #HEPA365)
Power Source: 120V AC, 60Hz
Dimensions: 20.5" H x 17.5" W x 13.5" D
Weight: 15.4 lbs (empty)

Controls and Operation

Access controls via the digital panel on top of the unit.

Control Panel: POWER, HUMIDISTAT (+/-), FAN SPEED (High/Med/Low), FILTER RESET.

Operation: Press POWER to turn on. Set desired humidity using HUMIDISTAT buttons. Select fan speed for moisture output. The humidifier will run until desired humidity is reached, then cycle automatically. The REFILL indicator will light when the tank is empty.

Filling the Water Tank

Use clean, cool tap water. Do not use hot water or additives.

Turn off and unplug the humidifier.
Remove the tank by lifting the handle.
Carry to sink, remove cap, and fill with water.
Replace cap securely and return tank to base.
Plug in and press POWER to resume operation.

Tip: For easier filling, use the easy-fill top feature without removing the tank.

Maintenance & Cleaning

Regular cleaning prevents mineral buildup and ensures efficient operation.

Unplug the humidifier before cleaning.
Empty and rinse the water tank daily.
Wipe the base and exterior with a damp, soft cloth.
Clean the tank weekly with a mixture of white vinegar and water (1:1 ratio).
Rinse thoroughly and air dry before reassembly.

CAUTION! Do not immerse the base in water. Never use abrasive cleaners or chemicals.

Filter Replacement

Replace the wicking filter every 1-3 months depending on usage and water hardness.

Turn off and unplug the humidifier.
Remove the water tank and set aside.
Remove the old filter from the frame and discard.
Insert the new filter (HEPA365) into the frame.
Replace the tank and press the FILTER RESET button on the control panel.

Note: The FILTER indicator will illuminate when replacement is recommended.

Safety Features

Automatic Shut-Off: Turns off when tank is empty or desired humidity is reached. Tip-Over Protection: Shuts off if unit is knocked over. Antimicrobial Filter: Inhibits growth of mold and bacteria in the water.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © Honeywell International Inc. For support, visit www.honeywellhumidifiers.com or contact 1-800-332-1110.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit not powering on	No power/plug not secure	Ensure unit is plugged in; check outlet; press POWER firmly.
Low or no mist output	Empty tank/clogged filter	Refill water tank; clean or replace filter.
Water leaking	Tank not seated properly	Turn off, empty tank, reseat securely on base.
Unusual noise	Fan obstruction/mineral buildup	Check for debris; clean fan and water distribution tray.
Filter indicator on	Filter needs replacement	Replace filter and press FILTER RESET button.
Humidity not reaching set level	Room too large/doors open	Ensure room size is within coverage area; close doors/windows.

Reset: Unplug for 10 seconds, then plug back in to reset control panel.

Service: 1-800-332-1110; www.honeywellhumidifiers.com